ABB ACS880-01 Series, Firmware Instructions

Page: 302 / 664

302 Parameters
30.104 LSU limit word 4 (Only visible when IGBT supply unit control activated by
95.20 )
Displays limit word 4 of the supply unit.
This parameter is read-only.
-
0000h…FFFFh Supply unit limit word 4. 1 = 1
30.148 LSU minimum
power limit
(Only visible when IGBT supply unit control activated by
95.20 )
Defines a minimum power limit for the supply unit.
Negative values refer to regenerating, ie. feeding power into
the supply network.
-130.0%
-200.0 … 0.0% Minimum power limit for supply unit. 1 = 1%
30.149 LSU maximum
power limit
(Only visible when IGBT supply unit control activated by
95.20 )
Defines a maximum power limit for the supply unit.
130.0%
0.0 … 200.0% Maximum power limit for supply unit. 1 = 1%
31
31 Fault functions Configuration of external events; selection of behavior of the
drive upon fault situations.
31.01 External event 1
source Defines the source of external event 1.
See also parameter
31.02 External event 1 type .
0 = Trigger event
1 = Normal operation
Inactive
(true)
; DI6
( 95.20 b8)
Active (false) 0. 0
Inactive (true) 1. 1
DIIL DIIL input ( 10.02 DI delayed status , bit 15). 2
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0). 3
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1). 4
DI3 Digital input DI3 ( 10.02 DI delayed status , bit 2). 5
DI4 Digital input DI4 ( 10.02 DI delayed status , bit 3). 6
DI5 Digital input DI5 ( 10.02 DI delayed status , bit 4). 7
DI6 Digital input DI6 ( 10.02 DI delayed status , bit 5). 8
DIO1 Digital input/output DIO1 ( 11.02 DIO delayed status , bit 0). 11
DIO2 Digital input/output DIO2 ( 11.02 DIO delayed status , bit 1). 12
Other [bit] Source selection (see Terms and abbreviations on page 148 ). -
31.02 External event 1
type Selects the type of external event 1. Fault
( 95.20 b8)
Fault The external event generates a fault. 0
Warning The external event generates a warning. 1
No. Name/Value Description Def / FbEq16
Bit Name Description
0 Udc ref max 1 = DC reference is being limited by supply control program
parameters
1 Udc ref min
2 User I max 1 = Current is being limited by supply control program parameters
3 Temp I max 1 = Current is being limited based on temperature
4…15 Reserved