ABB ACS860, Firmware Manual

Page: 215 / 438

Parameters 215
33.20 On-time 2 actual Displays the actual present value of on-time timer 2.
The timer runs whenever the signal selected by parameter
33.23 On-time 2 source is on.
When the timer exceeds the limit set by 33.21 On-time 2 warn
limit , bit 1 of 33.01 Counter status is set to 1. The warning
specified by 33.24 On-time 2 warn message is also given if
enabled by 33.22 On-time 2 function .
The timer can be reset from the Drive composer PC tool, or
from the control panel by keeping Reset depressed for over 3
seconds.
-
0…4294967295 s Actual present value of on-time timer 2. -
33.21 On-time 2 warn limit Sets the warning limit for on-time timer 2. 0 s
0…4294967295 s Warning limit for on-time timer 2. -
33.22 On-time 2 function Configures on-time timer 2. 0000b
0000b…0011b On-time timer 2 configuration word. 1 = 1
33.23 On-time 2 source Selects the signal to be monitored by on-time timer 2. False
False Constant 0 (timer disabled). 0
True Constant 1. 1
RO1 Bit 0 of 10.21 RO status (page 116 ). 2
Other [bit] Source selection (see Terms and abbreviations on page 92 ). -
33.24 On-time 2 warn
message Selects the optional warning message for on-time timer 2. On-time 2
exceeded
On-time 2
exceeded A887 On-time 2 . The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
1
Clean device A88C Device clean . 6
Maintain additional
cool fan A890 Additional cooling . 7
Maintain cabinet
fan A88E Cabinet fan . 8
Maintain DC
capacitors A88D DC capacitor . 9
Maintain motor
bearing A880 Motor bearing . 10
No. Name/Value Description Def / FbEq16
Bit Function
0 Counter mode
0 = Loop: When the limit is reached, the counter is reset. The counter status (bit 1 of
33.01 ) switches to 1 for one second. The warning (if enabled) stays active for at least 10
seconds.
1 = Saturate: When the limit is reached, the counter status (bit 1 of
33.01 ) switches to 1,
and remains so until 33.20 is reset. The warning (if enabled) also stays active until 33.20
is reset.
1 Warning enable
0 = Disable: No warning is given when the limit is reached
1 = Enable: A warning (see
33.24 ) is given when the limit is reached
2…15 Reserved