ABB ACS580 Series, Hardware Manual

Page: 274 / 468

Output ratings Max.
current
Input
rating
Frame size ACS580-
01-…
Heavy-duty use Light-duty use
PHd IHd PLd ILd Imax I1
hp A hp A A A
5.0 6.1 7.5 9.0 12.2 9.0 R2 09A0-6
7.5 9.0 10 11.0 16.2 11.0 R2 011A-6
10 11.0 15 17.0 23.0 17.0 R2 017A-6
15 17.0 20 22.0 30.6 22.0 R3 022A-6
20 22.0 25 27.0 39.6 27.0 R3 027A-6
25 27.0 30 32.0 48.6 32.0 R3 032A-6
30 32.0 40 41.0 58 41.0 R5 041A-6
40 41.0 50 52 74 52 R5 052A-6
50 52 60 62 94 62 R5 062A-6
60 62 75 77 112 77 R5 077A-6
75 77 100 99 139 99 R7 099A-6
100 99 125 125 178 125 R7 125A-6
125 125 150 144 225 144 R8 144A-6
150 144 200 192 259 192 R9 192A-6
200 192 250 242 346 242 R9 242A-6
250 242 250 271 411 271 R9 271A-6
Definitions
Nominal output voltage of the drive. For input voltage range [
U1, see section
Electrical power network specification (page 342) . 50 Hz for IEC ratings and
Un
60 Hz for UL (NEC) ratings.
Nominal input current (rms) at 40 °C (104 °F). I1
Maximum output current. Available for two seconds at start. Imax
Continuous rms output current allowing 10% overload for 1 minute every 10
minutes
ILd
Typical motor power in light-duty use (10% overload). The horsepower (hp) PLd
ratings apply to most NEMA 4-pole motors.
274 Technical data