ABB ACS580 Series, Firmware Manual, Page: 308 / 462

304 Parameters
50.07 FBA A actual 1 type Selects the type and scaling of actual value 1 transmitted to
the fieldbus network through fieldbus adapter A. The scaling
of the value is defined by parameters
46.01 … 46.04 ,
depending on which actual value type is selected by this
parameter.
Speed or
frequency
Speed or frequency Type and scaling is chosen automatically according to the
currently active operation mode as follows:
0
Transparent No scaling is applied. 1
General Generic reference without a specific unit. 2
Torque The scaling is defined by parameter 46.03 Torque scaling . 3
Speed The scaling is defined by parameter 46.01 Speed scaling . 4
Frequency The scaling is defined by parameter 46.02 Frequency scaling . 5
50.08 FBA A actual 2 type Selects the type and scaling of actual value 2 transmitted to
the fieldbus network through fieldbus adapter A. The scaling
of the value is defined by parameters
46.01 … 46.04 ,
depending on which actual value type is selected by this
parameter.
Speed or
frequency
Speed or frequency Type and scaling is chosen automatically according to the
currently active operation mode as follows:
0
Transparent No scaling is applied. 1
General Generic reference without a specific unit. 2
Torque The scaling is defined by parameter 46.03 Torque scaling . 3
Speed The scaling is defined by parameter 46.01 Speed scaling . 4
Frequency The scaling is defined by parameter 46.02 Frequency scaling . 5
50.09 FBA A SW
transparent source Selects the source of the fieldbus status word when
parameter
50.06 FBA A SW sel is set to Transparent mode .
Not selected
Not selected No source selected. -
Other Source selection (see Terms and abbreviations on page 144 ). -
50.10 FBA A act1
transparent source When parameter 50.07 FBA A actual 1 type is set to
Transparent , this parameter selects the source of actual value
1 transmitted to the fieldbus network through fieldbus adapter
A.
Not selected
Not selected No source selected. -
Other Source selection (see Terms and abbreviations on page 144 ). -
No. Name/Value Description Def/FbEq16
Operation mode
(see par. 19.01 )
Actual value 1 type
Speed control Speed
Torque control Speed
Frequency control Frequency
Operation mode
(see par. 19.01 )
Actual value 2 type
Speed control Torque
Torque control Torque
Frequency control Torque
ACS580 FW.book Page 304 Wednesday, September 21, 2016 9:48 PM