ABB ACS580-01 drives, Installation Manual

Page: 7 / 30

Installation with H358 UK gland plate 3
Installation with H358
UK gland plate
Safety instructions
Obey all safety instructions of the drive. Read the safety instructions before you
install, start up, or use the drive. See the hardware manual.
Introduction to the guide

Applicability
This guide is applicable to the following drives with H358 UK gland plate and
degree of protection of IP21:
• ACS880-01
• ACH580-01, ACQ580-01, ACS580-01.
The guide is a supplement to the hardware manual.

Target audience
This supplement is intended for people who plan the installation, install, start up, use
and service the drive. Read the supplement before you do work on the drive. You are
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.

Contents of the guide
This guide contains installation instructions on how to
• remove the standard bottom plate and power cable shelf from the drive
• install SWA glands over the power and control cables
• install SWA glands to the UK gland plate
• install the UK gland plate to the drive
• connect the power cables to the drive.
For other instructions, see the drive hardware manual.