ABB ACS560, Firmware Manual

Page: 223 / 514

Parameters 223
22.51 Critical speed
function Enables/disables the critical speeds function. Also
determines whether the specified ranges are effective in both
rotating directions or not.
See also section
Critical speeds/frequencies (page 44 ).
0b0000
0b000...0b1111 Critical speeds configuration word. 1 = 1
22.52 Critical speed 1 low Defines the low limit for critical speed range 1.
Note: This value must be less than or equal to the value of
22.53 Critical speed 1 high .
0.00
-30000.00…
30000.00 rpm Low limit for critical speed 1. See par.
46.01
22.53 Critical speed 1
high Defines the high limit for critical speed range 1.
Note: This value must be greater than or equal to the value of
22.52 Critical speed 1 low .
0.00
-30000.00…
30000.00 rpm High limit for critical speed 1. See par.
46.01
22.54 Critical speed 2 low Defines the low limit for critical speed range 2.
Note: This value must be less than or equal to the value of
22.55 Critical speed 2 high .
0.00
-30000.00…
30000.00 rpm Low limit for critical speed 2. See par.
46.01
22.55 Critical speed 2
high Defines the high limit for critical speed range 2.
Note: This value must be greater than or equal to the value of
22.54 Critical speed 2 low .
0.00
-30000.00…
30000.00 rpm High limit for critical speed 2. See par.
46.01
22.56 Critical speed 3 low Defines the low limit for critical speed range 3.
Note: This value must be less than or equal to the value of
22.57 Critical speed 3 high .
0.00
-30000.00…
30000.00 rpm Low limit for critical speed 3. See par.
46.01
22.57 Critical speed 3
high Defines the high limit for critical speed range 3.
Note: This value must be greater than or equal to the value of
22.56 Critical speed 3 low .
0.00
-30000.00…
30000.00 rpm High limit for critical speed 3. See par.
46.01
22.71 Motor
potentiometer
function Activates and selects the mode of the motor potentiometer.
See section
Speed compensated stop (page 76 ).
Disabled
Disabled Motor potentiometer is disabled and its value set to 0. 0
No. Name/Value Description Def/FbEq16
Bit Name Information
0 Enable 1 = Enable: Critical speeds enabled.
0 = Disable: Critical speeds disabled.
1 Sign mode 1 = Signed: The signs of parameters 22.52 … 22.57 are taken into
account.
0 = Absolute: Parameters
22.52 … 22.57 are handled as absolute values.
Each range is effective in both directions of rotation.
2…15 Reserved