ABB ACS560, Firmware Manual

Page: 170 / 514

170 Parameters
04.40 Event word 1 Shows the user-defined event word. This word collects the
status of the events (warnings, faults or pure events) selected
by parameters
04.41 … 04.71 .
This parameter is read-only.
-
0000h…FFFFh User-defined event word. 1 = 1
04.41 Event word 1 bit 0
code Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 0 of
04.40 Event
word 1 . The event codes are listed in chapter Fault tracing
(page 409 ).
0x2310h
0000h…FFFFh Code of event. 1 = 1
04.43 Event word 1 bit 1
code Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 1 of
04.40 Event
word 1 . The event codes are listed in chapter Fault tracing
(page 409 ).
0x3210h
0000h…FFFFh Code of event. 1 = 1
04.45,
04,47,
04,49,
… … … …
04.71 Event word 1 bit 15
code Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 15 of
04.40 Event
word 1 . The event codes are listed in chapter Fault tracing
(page 409 ).
0x2330h
0000h…FFFFh Code of event. 1 = 1
05
05 Diagnostics
Various run-time-type counters and measurements related to
drive maintenance.
All parameters in this group are read-only unless otherwise
noted.
05.01 On-time counter On-time counter. The counter runs when the drive is
powered. 0
0…65535 d On-time counter. 1 = 1 d
05.02 Run-time counter Motor run-time counter. The counter runs when the inverter
modulates. 0
0…65535 d Motor run-time counter. 1 = 1 d
05.03 Hours run Corresponding parameter to 05.02 Run-time counter in
hours, that is, 24 * 05.02 value + fractional part of a day.
-
0.0…
429496729.5 h Hours. 1 = 1 h
05.04 Fan on-time
counter Running time of the drive cooling fan. Can be reset from the
control panel by keeping Reset down for over 3 seconds. 0
0…65535 d Cooling fan run-time counter. 1 = 1 d
No. Name/Value Description Def/FbEq16
Bit Name Description
0 User bit 0 1 = Event selected by parameter 04.41 is active
1 User bit 1 1 = Event selected by parameter 04.43 is active
… … …
15 User bit 15 1 = Event selected by parameter 04.71 is active