ABB ACS5000, User Manual

Page: 23 / 186

3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 23/186
01 ABOUT THIS MANUAL
1.5 Trademarks
Names that are believed to be trademarks of other companies and
organizations are designated as such. The absence or presence of such a
designation should however not be regarded as an offense of the legal
status of any trademark. The following registrations and trademarks are
used in this manual:
Motor terminal
section This is the customer terminal for connecting motor
cables. It is located behind the swing frame of the COU
compartment.
NP Neutral point
OEI Optical-electrical interrupter
PCU A primary phase converter unit (PCU) consists of a
transformer terminal section, a rectifier stack, a DC link
and an inverter stack.
A secondary phase converter unit consists of a DC link and
an inverter stack.
Phase module The phase module is a compact assembly of wired
components including power semiconductors and circuit
boards that serves as a standardized building block for
the inverter and rectifier stack.
PINT Pulse interface
SW Software
S800 I/O The S800 I/O is a distributed process input / output
system that can be connected to various process
controllers from ABB and other companies.
Transformer
terminal section This is the customer terminal for connecting transformer
cables. It is located in the back of the PCU compartment.
WCU The water cooling unit (WCU) dissipates heat losses of
the power electronics.
Table 1-8 Terms and abbreviations (continued)
Term/Abbreviation Definition
Table 1-9 Trademarks
Trademark Description
ABB Ability™ Registered trademark of ABB
Arc Guard System™ Registered trademark of ABB
DeviceNet® Registered trademark of the Open DeviceNet Vendor
Association, Inc.
DriveWare® Registered trademark of ABB
Ethernet® Registered trademark of Xerox Corporation
Industrial IT™ Trademark of ABB