ABB ACS350 Series, User Manual

Page: 97 / 314

Program features
97
Contents of the assistant displays
There are two types of displays in the Start-up Assistant: The main displays and the
information displays. The main displays prompt the user to feed in information. The
assistant steps through the main displays. The information displays contain help
texts for the main displays. The figure below shows a typical example of both and
explanations of the contents.
Local control vs. external control
The drive can receive start, stop and direction commands and reference values from
the control panel or through digital and analog inputs. Embedded fieldbus or an
optional fieldbus adapter enables control over an open fieldbus link. A PC equipped
with DriveWindow Light PC tool can also control the drive.
Main display Information display
1
2
1 Parameter Help text …
2 Feed-in field … help text continued
9905 MOTOR NOM VOLT
PAR EDIT
240 V
EXIT SAVE 00:00
LOC
EXIT 00:00
Set exactly as given
on the motor
nameplate
If connected to
multiple motors
HELP LOC
ACS350
Control panel
External Control Local Control
Standard I/O
Panel connection (X2)
or
PC tool
Panel connection (X2)
Fieldbus adapter connection (X3)
Potentiometer
FMBA adapter connected to X3
or
Embedded
fieldbus
(Modbus)
Fieldbus
adapter