ABB ACS280, Firmware Manual, Page: 217 / 430

Parameters 217
Speed ref ramp out
23.02 Speed ref ramp output
. 11
Speed ref used
24.01 Used speed reference
. 12
Torque ref used
26.02 Torque reference used
. 13
Freq ref used
28.02 Frequency ref ramp output
. 14
Process PID out
40.01 Process PID output actual
. 16
Other
Source selection (see
Terms and abbreviations
). -
36.02 PVL filter time
Peak value logger filtering time. See parameter
36.01
PVL signal source
.
2.00 s
0.00…120.00 s Peak value logger filtering time. 100 = 1 s
36.06 AL2 signal source
Selects the signal to be monitored by amplitude
logger 2. The signal is sampled at 200 ms intervals.
The results are displayed by parameters
36.40
…
36.49
. Each parameter represents an amplitude
range, and shows what portion of the samples fall
within that range.
The signal value corresponding to 100% is defined by
parameter
36.07 AL2 signal scaling
.
Amplitude logger 2 can be reset using parameter
36.09 Reset loggers . The date and time of the last
reset are stored into parameters
36.50
and
36.51
respectively.
For the selections, see parameter
36.01 PVL signal
source
.
Motor
torque
See parameter
36.01
for the selections.
36.07 AL2 signal scaling
Defines the monitored signal value for the amplitude
logger AL2 that corresponds to 100% sample value.
100.00
0.00…32767.00 Signal value corresponding to 100%. 1 = 1
36.09 Reset loggers
Resets the peak value logger and/or amplitude logger
2. (Amplitude logger 1 cannot be reset.)
Done
Done Reset completed or not requested (normal
operation).
0
All Reset both the peak value logger and amplitude
logger 2.
1
PVL Reset the peak value logger. 2
AL2 Reset amplitude logger 2. 3
36.10 PVL peak value
Shows the peak value recorded by the peak value
logger.
0.00
-32768.00… 32767.00 Peak value. 1 = 1
36.11 PVL peak date
Shows the date when the peak value was recorded. 01/01/1980
1/1/1980...6/5/2159 Peak occurrence date. -
36.12 PVL peak time
Shows the time when the peak value was recorded. 00:00:00
- Peak occurrence time. -
36.13 PVL current at peak
Shows the Motor current at the moment the peak
value was recorded.
0.00 A
-32768.00… 32767.00 A Motor current at peak. 1 = 1 A
No. Name/Value Description Default
FbEq 16