ABB ACS280, Firmware Manual, Page: 108 / 430

108 Parameters
09
10 Standard DI, RO Configuration of digital inputs and relay outputs.
10.01 DI status Displays the status of digital inputs. 0000h
0000h…FFFFh Status of digital inputs. 1 = 1
10.02 DI delayed status Displays the status of digital inputs. This word is
updated only after activation / deactivation delays.
0000h
0000h…FFFFh Delayed status of digital inputs. 1 = 1
10.03 DI force selection Selects the digital inputs, states of which will be
controlled by parameter
10.04 DI forced data
. A bit in
parameter 10.04 DI forced data is provided for each
digital input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Note: Boot and power cycle reset the force selections
(parameters
10.03
and
10.04
).
0000h
0000h…FFFFh Override selection for digital inputs. 1 = 1
10.04 DI forced data
Defines the forced values for the digital inputs
selected by parameter
10.03 DI force selection
. It is
only possible to force an input that has been selected
in parameter
10.03 DI force selection
.
Bit 0 is the forced value for DI1.
0000h
No. Name/Value Description Default
FbEq 16
Bit Value
0 DI1 = Status of digital input 1.
1 DI2 = Status of digital input 2.
2 DI3 = Status of digital input 3.
3 DI4 = Status of digital input 4.
6...15 Reserved.
Bit Value
0 DI1 = Delayed status of digital input 1.
1 DI2 = Delayed status of digital input 2.
2 DI3 = Delayed status of digital input 3.
3 DI4 = Delayed status of digital input 4.
6...15 Reserved.
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
10.04 DI forced data
.
1 1 = Force DI2 to value of bit 1 of parameter
10.04 DI forced data
.
2 1 = Force DI3 to value of bit 2 of parameter 10.04 DI forced data .
3 1 = Force DI4 to value of bit 3 of parameter 10.04 DI forced data .
5...15 Reserved.
Bit Value
0 Force the value of this bit to DI1, if so defined in parameter
10.03 DI force selection
.
1 Force the value of this bit to DI2, if so defined in parameter
10.03 DI force selection
.
2 Force the value of this bit to DI3, if so defined in parameter 10.03 DI force selection .
3 Force the value of this bit to DI4, if so defined in parameter
10.03 DI force selection
.
5...15 Reserved.