ABB ACS180, Firmware Manual, Page: 249 / 392

Parameters 249
40.91 Feedback data
storage Storage parameter for receiving a process feedback value
eg. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data.
Set the target selection parameter of that particular data
(
58.101 … 58.114 ) to Feedback data storage . In 40.08 Set
1 feedback 1 source (or 40.09 Set 1 feedback 2 source ),
select Feedback storage .
0.00
-327.68 … 327.67 Storage parameter for process feedback. 100 = 1
40.92 Setpoint data storage Storage parameter for receiving a process setpoint value
eg. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data.
Set the target selection parameter of that particular data
(
58.101 … 58.114 ) to Setpoint data storage . In 40.16 Set 1
setpoint 1 source (or 40.17 Set 1 setpoint 2 source ),
select Setpoint data storage .
0.00
-327.68 … 327.67 Storage parameter for process setpoint. 100 = 1
40.96 Process PID output % Percentage scaled signal of parameter 40.01 Process PID
feedback actual .
0.00%
-100.00…100.00% Percentage. 100 = 1%
40.97 Process PID feedback
% Percentage scaled signal of parameter 40.02 Process PID
feedback actual .
0.00%
-100.00…100.00% Percentage. 100 = 1%
40.98 Process PID setpoint
% Percentage scaled signal of parameter 40.03 Process PID
setpoint actual .
0.00%
-100.00…100.00% Percentage. 100 = 1%
40.99 Process PID deviation
% Percentage scaled signal of parameter 40.04 Process PID
deviation actual .
0.00%
-100.00…100.00% Percentage. 100 = 1%
41
41 Process PID set 2
A second set of parameter values for process PID control.
The selection between this set and first set (parameter
group
40 Process PID set 1 ) is made by parameter 40.57
PID set1/set2 selection .
See also parameters 40.01 … 40.06 , and the control chain
diagrams on pages 386 and 387 .
41.08 Set 2 feedback 1
source See parameter 40.08 Set 1 feedback 1 source . Not selected
41.09 Set 2 feedback 2
source See parameter 40.09 Set 1 feedback 2 source . Not selected
41.10 Set 2 feedback
function See parameter 40.10 Set 1 feedback function . In1
41.11 Set 2 feedback filter
time See parameter 40.11 Set 1 feedback filter time . 0.000 s
41.14 Set 2 setpoint scaling See parameter 40.14 Set 1 setpoint scaling . 0.00
41.15 Set 2 output scaling See parameter 40.15 Set 1 output scaling . 1500.00;
1800.00
(
95.20 b0)
41.16 Set 2 setpoint 1
source See parameter 40.16 Set 1 setpoint 1 source . Not selected
No. Name/Value Description Default
FbEq 16
ACS180 FW.book Page 249 Tuesday, March 9, 2021 2:25 PM