ABB ACS1000i air-cooled, User Manual

Page: 95 / 174

07 ELECTRICAL INSTALLATION
3BHS206977 E01 REV H ACS1000I AIR-COOLED USER MANUAL 95/174
7.5.3.1 Installing the cable entry box on the terminal compartment roof
1. Remove the transport cover from the cabinet roof.
2. Fasten the cable entry box to the roof of the terminal compartment
- Input voltage of the drive is less than or equal to 6.9 kV : fasten the cable entry box at
the places indicated by (1 in Fig. 7-3) and (2 in Fig. 7-3).
- Input voltage of the drive is greater than 6.9 kV : fasten the cable entry box at the places
indicated by (1 in Fig. 7-3).
Figure 7-3: Bolt locations for cable entry box on terminal compartment roof
(
A
is the back and
B
is the front of the compartment)
Note: If the input voltage of the drive is higher than 6.9 kV, continue with the following steps,
ie, “7.5.3.2 Installing the insulating barrier for top cable entry” on page 96.
(1) Bolt location
(2) Bolt location
(3) M6 x 16
(4) M6
1
1 1 1
2 2
A
B
3
4