CDP CONTROL PANEL
PRODUCT
ACS1000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS213400 E01
REV.
J
LANG.
en
PAGE
121/166
After 2-3 seconds, information on the drive (1, 2) and the drive identification (3) is
displayed.
After another few seconds:
After another few seconds, the display changes to the actual signals mode.
10.3.2. Actual signals mode
10.3.2.1. Overview
Two displays can be selected in the actual signals mode:
–
Actual signals display
–
Fault memory display
The actual signals display appears first when entering the actual signals mode.
However, when the drive is in a fault condition, the fault memory display appears
instead.
The actual signals display is used to monitor the drive without interfering with its
operation. It continuously displays three selectable actual values.
The CDP control panel automatically returns to the actual signals display from
other modes if no key is actuated within one minute (an exception from this is the
fault memory display).
ACS1000 xxxx
<Device Name>
ID-NUMBER 1
1
2
3
1 L ->
0.0 rpm
Status
InitSeq....
MotorSpeed 0.00
rpm
Power
0.0 %
1 L ->
0.0 rpm
Status
ErthIsoClos
MotorSpeed 0.00
rpm
Power
0.0 %
