ABB ACQ80-04 Series, Firmware Manual

Page: 128 / 270

128 Parameters
AL2 Reset amplitude logger 2. 3
36.10 PVL peak value Shows the peak value recorded by the peak value logger. 0.00
-32768.00…
32767.00 Peak value. 1 = 1
36.11 PVL peak date Shows the date when the peak value was recorded. 01/01/1980
1/1/1980...6/5/2159 Peak occurrence date. -
36.12 PVL peak time Shows the time when the peak value was recorded. 00:00:00
- Peak occurrence time. -
36.13 PVL current at peak Shows the Motor current at the moment the peak value was
recorded. 0.00 A
-32768.00…
32767.00 A Motor current at peak. 1 = 1 A
36.14 PVL DC voltage at
peak Shows the voltage in the intermediate DC circuit of the drive
at the moment the peak value was recorded. 0.00 V
0.00…2000.00 V DC voltage at peak. 10 = 1 V
36.15 PVL speed at peak Shows the Motor speed at the moment the peak value was
recorded. 0.00 rpm
-30000… 30000
rpm Motor speed at peak. See par.
46.01
36.16 PVL reset date Shows the date on which the peak value logger was last
reset. 01/01/1980
1/1/1980...6/5/2159 Last reset date of the peak value logger. -
36.17 PVL reset time Shows the time when the peak value logger was last reset. 00:00:00
- Last reset time of the peak value logger. -
36.20 AL1 0 to 10% Shows the percentage of samples recorded by amplitude
logger 1 that fall between 0 and 10%. 100% corresponds to
the
I
max
value given in the ratings table in chapter Technical
data in the hardware manual.
0.00%
0.00…100.00% Amplitude logger 1 samples between 0 and 10%. 1 = 1%
36.21 AL1 10 to 20% Shows the percentage of samples recorded by amplitude
logger 1 that fall between 10 and 20%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 10 and 20%. 1 = 1%
36.22 AL1 20 to 30% Shows the percentage of samples recorded by amplitude
logger 1 that fall between 20 and 30%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 20 and 30%. 1 = 1%
36.23 AL1 30 to 40% Shows the percentage of samples recorded by amplitude
logger 1 that fall between 30 and 40%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 30 and 40%. 1 = 1%
36.24 AL1 40 to 50% Shows the percentage of samples recorded by amplitude
logger 1 that fall between 40 and 50%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 40 and 50%. 1 = 1%
36.25 AL1 50 to 60% Percentage of samples recorded by amplitude logger 1 that
fall between 50 and 60%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 50 and 60%. 1 = 1%
No. Name/Value Description Def/FbEq16
ACQ80 FW.book Page 128 Thursday, February 14, 2019 11:33 AM