ABB ACQ580, Quick Start Up Manual

Page: 5 / 70

EN – Quick start-up guide 5
R0-
R4
EN
DE
ES
FR
IT
RU
SV
Refer to the motor or pump nameplate for the following nominal value settings of the motor.
Enter the values exactly as shown on the motor or pump nameplate.
Example of a nameplate of an induction (asynchronous) motor:
Check that the motor data is correct. Values are
predefined on the basis of drive power, but you
should verify that they correspond to the motor.
Start with the motor type. Go to the edit view of a
selected row by pressing
.
• Scroll the view with and .
Motor nominal cos Φ and nominal torque are
optional.
Press
( Next ) to continue.
Adjust the limits according to your needs.
• Go to the edit view of a selected row by
pressing .
• Scroll the view with and .
Go to the next view by pressing ( Next ).
If you want to make a backup of the settings made
so far, select
Backup and press ( Next ).
If you do not want to make a backup, select Not
now and press ( Next ).
Note : The control panel has space for one
automatic backup. Drive creates an automatic
backup two hours after the last parameter change.
The panel checks for additional parameter
changes at intervals of 24 hours. The new backup
will overwrite the previous backup only when the
last change has passed two hours.
M2AA 200 MLA 4
1475
1475
1470
1470
1475
1770
32.5
56
34
59
54
59
0.83
0.83
0.83
0.83
0.83
0.83
3GAA 202 001 - ADA
180
IEC 34-1
6210/C3 6312/C3
Cat. no
35
30
30
30
30
30
50
50
50
50
50
60
690 Y
400 D
660 Y
380 D
415 D
440 D
V
Hz kW
r/min A cos
IA/IN t E/s
Ins.cl. F
IP 55
No
IEC 200 M/L 55
3 motor
ABB Motors