ABB ACQ580-07, Hardware Manual

Page: 55 / 324

￭
Door switches and lights
Description Label in local
language
Label in English
Ready pilot light (G327) - READY 1
Run pilot light (G328) - RUN 2
Fault pilot light (G329) - FAULT 3
Operating switch with F250 - MAIN CONTACT-
OR
OFF ON
4
Opens the main contactor (Q2) and disables
starting of the drive 0
Closes the main contactor (Q2) 1
Emergency stop indication light and reset push button
with oQ951 and +Q963 - EMERGENCY
STOP RESET
5
Emergency stop push button with oQ951 and
+Q963 - EMERGENCY
STOP
6
Main switch-disconnector Q1
The switch-disconnector handle switches the main voltage to the drive on and off.
￭
Control panel
The control panel is the user interface of the drive. It provides the essential controls
such as Start/Stop/Direction/Reset/Reference, and the parameter settings for the control
program.
One control panel can be used to control several drives through a panel link.
The control panel can be removed by pulling it forward from the top edge and
disconnecting the panel cable. The panel is reinstalled in reverse order. For the use of
the control panel, see the firmware manual or
ACX-AP-x Assistant control panel user’s
manual (3AUA0000085685 [English]).
Operation principle and hardware description 51