ABB ACL30, User Manual

Page: 226 / 360

226 Parameters
0b0000…0b1111 AI1/AI2 signal supervision selection. 1 = 1
15
15 ANALOGUE
OUTPUTS
Settings for the analogue outputs.
15.01 AO1 PTR
Selects a drive signal to be connected to analogue
output AO1.
See parameter
01.05 CURRENT PERC.
P.CURRENT
PERC /
Val
pointer
Value pointer (See Terms and abbreviations on page
183 .)
15.02 AO1 FILT TIME Defines the filtering time constant for analogue
output AO1. 0.100 s/
Real
0.000…30.000 s Filter time constant for AO1. 1000 = 1 s / -
15.03 AO1 MAX Defines the maximum value for analogue output
AO1. 20.000 mA/
Real
0.000…22.700
mA Maximum AO1 output value. 1000 = 1 mA
/ -
15.04 AO1 MIN Defines the minimum value for analogue output AO1. 4.000 mA/
Real
0.000…22.700
mA Minimum AO1 output value. 1000 = 1 mA
/ -
No. Bit/Name/Value/
Range Description Def/Type
FbEq
(16b/32b)
63
%
100
T
t
O = I × (1 - e
-t /T
)
I = filter input (step)
O = filter output
t = time
Unfiltered signal
Filtered signal