ABB ACH-AP-H User Manual Download | Manualshive

Page: 73 / 82

background image

Connecting a PC tool to a drive through the control panel

You can use the control panel to connect an ABB PC tool to the drive. When using the
control panel, you can only access the drive from the PC tool.

1.

Install an ABB PC tool to the PC.

2.

Connect the control panel to the drive.

3.

Connect the control panel to the PC with a USB cable as instructed in

control panel to PC USB (page 72)

.

4.

If Windows prompts you to install USB drivers, install them as instructed in

Drive

composer user’s manual

(3AUA0000094606 [English]).

The behavior depends on the current control location of the drive. See

Connecting in local

control mode (page 73)

and

Connecting in remote control mode (page 73)

￭

Connecting in local control mode

When you connect the control panel in local control mode to a PC, local control is transferred
to the PC tool and the control panel displays the USB screen. The drive retains its present
reference and direction.

When you have finished using the PC tool, close the connection through the PC tool first
and then disconnect the USB cable. Local control is transferred back to the control panel
and the drive retains its present reference and direction.

Note:

If you disconnect the USB cable before closing the connection, a local loss fault is

triggered.

￭

Connecting in remote control mode

When you connect the control panel in remote control mode to a PC, the control panel
displays the USB screen and you can only interact with the control panel through the PC
tool. The drive remains in remote control, but you can switch over to local control using the
PC tool.

When you disconnect the PC tool, the control panel exits the USB screen and the drive
resumes its normal operation.

Transferring files between the control panel and a PC

1.

Connect the control panel to a PC with a USB cable as instructed in

Connecting control

panel to PC USB (page 72)

.

2.

If Windows prompts you to install USB drivers, install them as instructed in

Drive

composer user’s manual

(3AUA0000094606 [English]).

The control panel appears as an MTP device in Windows Explorer.

3.

Open

ABB Drives Assistant control panel

with Windows Explorer, and go to the

directory where the files are stored.

•

Screenshots are stored in: ABB Drives Assistant control panel\ABB Drives Assistant
control panel_a\screen

•

Backup files are stored in: ABB Drives Assistant control panel\ABB Drives Assistant
control panel_a\backup

4.

You can copy files to and from the folders just like any other files with Windows Explorer.

Panel-to-PC USB connection 73

«
...
71
72
73
74
75
...
»

Summary of Contents for ACH-AP-H



















































































Reviews:

No comments

Related manuals for ACH-AP-H

Brand: T-Verter Pages: 121

Brand: Happy Pages: 10

Brand: Vacon Pages: 64

Brand: Jafar Pages: 9

Brand: Samsung Pages: 6

Brand: Samsung Pages: 32

Brand: Dahua Pages: 58

Brand: Eaton Pages: 6

Brand: Eaton Pages: 35

Brand: Eaton Pages: 18

Brand: Eaton Pages: 73

Brand: Eaton Pages: 4

Cutler-Hammer IQ DP-4000

Brand: Eaton Pages: 87

Brand: Eaton Pages: 14

Brand: Eaton Pages: 36

Brand: Galaxy Control Systems Pages: 5

Brand: Racal Instruments Pages: 94

Brand: Racal Instruments Pages: 97

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands