ABB Ability 800xA Series, User Manual

Page: 9 / 122

3BSE037076-510 D 9
About This User Manual
General
Any security measures described in this User Manual, for example, for user
access, password security, network security, firewalls, virus protection, etc.,
represent possible steps that a user of an 800xA System may want to consider
based on a risk assessment for a particular application and installation. This risk
assessment, as well as the proper implementation, configuration, installation,
operation, administration, and maintenance of all relevant security related
equipment, software, and procedures, are the responsibility of the user of the
800xA System.
This user manual describes the 800xA Multisystem Integration system extension.
800xA Multisystem Integration makes it possible to connect to one or more 800xA
systems and operate them from one single place, as if they where one system.
The user manual consists of the following sections:
• Introduction - describes the functionality of 800xA Multisystem Integration.
• Installation - describes the installation of 800xA Multisystem Integration and
some typical hardware configurations.
• Configuration - describes of how to configure 800xA Multisystem Integration.
• Operation - provides information for the operators and engineers on how to
operate and supervise a system using 800xA Multisystem Integration.
• Maintenance - provides information on how to maintain Multisystem
Integration, backup/restore a configuration, System Alarm and Events, Audit
Events, and System Status.
• Error Messages - describes error messages for the system with explanations.
• Fault Tracing - provides instruction to use when the system malfunction.