ABB Ability 800xA Series, User Manual

Page: 42 / 122

Figure 23. Upload Configuration Dialog Box
Since all referenced objects will be uploaded, it is possible to limit the upload to
only the objects with displays used for the operation of the provider system.
Upload Configuration Section 3 Configuration
42 3BSE037076-510 D
Select the desired structure/object from the provider system in the left structure
selector (Remote object path). To include or remove the child objects of the selected
object, select or deselect the
Include children
check box appropriately.
The
Follow references
check box controls if objects needed by an uploaded aspect
should be included in the upload as well. If this check box is selected Faceplate
Elements and Display Elements will be included when Faceplates respectively
Graphic Displays are uploaded.
The right structure selector (Local parent object) makes it possible to upload to a
structure other than the structure selected in the provider system. If structure
selected in the subscriber system is not the Control Structure, the proxy objects for