manualshive.com logo in svg

ABB ABB-free@home BI-S-1-xx-WL Series, Product Manual

Share
Download
ABB ABB-free@home BI-S-1-xx-WL Series Product Manual Download Page 11

 

Setup and function

 

 

 

 

 

 

Product manual 2CKA001473B9425

│11

 

 

 

3.3 

Additional product features 

 

 

No laying of cables is required for both types of detectors. Communication with the free@home 
system is carried out wireless. 

The devices are operated with a lithium battery (type CR2, 3 V). Material required for 
commissioning is supplied. Also a System Access Point is required for commissioning. 

The status of window sensors/universal detectors can be visualized on the free@home panel 
and in the free@home app via radio signal. 

The devices are not pre-programmed. Programming is carried out via the user interface of the 
System Access Point. 

 

 

3.4 

Battery service life 

 

 

The service life of the battery depends mainly on the respective usage; also depending on how 
often the window contact is opened, and on the battery type and the state of charge. For 
standard use (window sensor: two openings of the window per day) we assume a battery 
service life of up to 3 years. 

For operating the detector we recommend the use of lithium batteries (type CR2, 3 V). The use 
of rechargeable batteries is not recommended due to their lower voltage level in comparison to 
standard batteries.  

 

 

 

Summary of Contents for ABB-free@home BI-S-1-xx-WL Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands