ABB A238-H Series, Original Assembly Instructions

Page: 6 / 24

Assembly Instructions / A200-H
1 Introduction / 1.5 Definition of mandatory signs
© Copyright 2021 ABB. All rights reserved. HZTL455311P0042_EN Rev.A September 2021
1.5 Definition of mandatory signs
To be worn at all times
Protective clothing Safety footwear to protect
against mechanical hazard and
risk of falling
Table 1: Personal protective equipment to be worn at all times
To be worn specific to the respective task
Safety glasses Safety goggles
Safety gloves to protect
against
- Mechanical hazard
- Chemical hazard
- Thermal hazard
Respiratory mask to protect
against
- Dusts
- Gases
Safety helmet Ear protection
Table 2: Personal protective equipment to be worn specific to the respective task
1.6 Definition of pictograms
Definition of pictograms
The following pictograms can occur in this document. These point out actions that must be
taken in accordance with the meaning of the relevant pictogram.
Pictogram Meaning Pictogram Meaning
Tighten with specified torque Affix
Tighten over specified tight-
ening angle Measure
Hand-tight, tighten without
tools Note
Oil Visually inspect
Apply screw locking paste
(e.g. Loctite) Please note text for numbered
work step.
Apply high-temperature
grease See document
Apply other paste in accord-
ance with specifications Dispose of in an environmentally
compatible, professional way
and in compliance with locally
applicable regulations.
Oil free, grease free and dry
Table 3: Definition of pictograms
Page
4
/
21