Operation Manual / 4 Product description / A130-H.. - A140-H..
Tables
Page 115 / 115
© Copyright 2015 ABB. All rights reserved.
HZTL4030_EN
Revision C
September 2015
Tables
Table 1 Related documents ................... 5
Table 2 Turbocharger weights ............... 11
Table 3 Requirements for threaded rods 17
Table 4 Tightening torques for standard
nuts ............................................ 19
Table 5 Pressure screw tightening
torque ........................................ 21
Table 6 Lubricating oil pressure, oil inlet 29
Table 7 Lubricating oil temperature at
the inlet ...................................... 30
Table 8 Lubricating oil temperature at
the outlet .................................... 30
Table 9 Tightening torque (86505)......... 34
Table 10 Expected replacement intervals 41
Table 11 Maintenance table ..................... 45
Table 12 Parameters for wet cleaning of
compressor ............................... 49
Table 13 Turbine wet cleaning,
recommended operating state .. 52
Table 14 Wet cleaning of turbines,
parameters ................................ 53
Table 15 Value table for soaking ............. 61
Table 16 Malfunctions when starting –
Delayed start-up ........................ 65
Table 17 Malfunctions when starting –
Vibrations .................................. 65
Table 18 Malfunctions when starting –
Rubbing of rotating parts ........... 65
Table 19 Malfunctions during operation –
Lubricating oil pressure too low 66
Table 20 Malfunctions during operation –
Speed reduces .......................... 66
Table 21 Malfunctions during operation –
Speed increases ....................... 66
Table 22 Malfunctions during operation –
Exhaust gas temperature too
high ............................................ 67
Table 23 Malfunctions during operation –
Charge air pressure too low ...... 67
Table 24 Malfunctions during operation –
Charge air pressure too high .... 68
Table 25 Malfunctions during operation –
Engine performance losses ....... 68
Table 26 Malfunction – Turbocharger
pumping ..................................... 69
Table 27 Malfunction – Sporadic surge
blows .......................................... 69
Table 28 Malfunctions when stopping –
Runout noises ............................ 70
Table 29 Malfunctions when stopping –
Runout time too short................. 70
Table 30 Malfunction of the speed
measurement system – No
signal or poor signal amplitude .. 71
Table 31 Malfunction of the speed
measurement system –
Measured speed too high .......... 71
Table 32 Malfunction of the speed
measurement system –
Measured speed too low ........... 71
Table 33 Swivel lifting eyes ....................... 75
Table 34 Ring nuts to be used .................. 76
Table 35 Weights of assemblies ............... 77
Table 36 Gas outlet flange press-off
screws ........................................ 80
Table 37 Permissible clearances A and B 87
Table 38 Permitted nozzle ring
compression PD......................... 88
Table 39 Tightening torque (51007) ......... 91
Table 40 Tightening torque (79041) ......... 93
Table 41 Tightening torque (72011) ......... 94
Table 42 Permissible clearances N
and R .......................................... 95
Table 43 Tightening torque (72020) ......... 96
Table 44 Tightening torque (51009) ......... 97
Table 45 Tightening torques of the screw
fittings ......................................... 98
Table 46 Tightening torques for insulation 99
Table 47 Cover plate dimensions [mm] .... 104
Table 48 Customer spare part set 97070 . 109
Table 49 Spare parts list ........................... 111
