ABB 83327-500, Manual, Page: 8 / 17

ABB Welcome
®
— 8 —
4.2.4 Mode=4, programming mode
Fig. 5: mode=4, programming mode
Rotary Value Note
Mode 4 Camera interface works in programming mode.
Addr null
Camera interface mode, camera interface address and associated device
address can all be programmed with software.
In mode=4, besides camera interface and guard unit, camera interface can
also be associated with video indoor station.
If camera interface is associated with video indoor station, ID should start
from 1 to 9 sequently.
For details, see
Chapter 4.3 Programming mode.
ID null
Dip Switch 1-4 Turn to ON when a camera is connected.
Capacity
Each camera interface supports four analog cameras. Each camera can be associated with
different devices (i.e., outdoor station, guard unit, video indoor station).
A total of 36 cameras can be associated with each video indoor station. Each camera can be
associated with 250 indoor stations.