background image

Operating Instructions 

 

 

Busch-AudioWorld

®

 

 

Installation and electrical

connection

 

 

 

 
 

 
 
Operating Instructions | 1473-1-7955 

— 25 —

   

Pos: 76 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/M - O/Montage und elektrischer Anschluss @ 23\mod_1336477157864_15.docx @ 209033 @ 1 @ 1 

 

Installation and electrical connection 

 

Pos: 77 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Niederspannungs- und 230 V-Leitungen @ 23\mod_1336558868201_15.docx @ 209164 @  @ 1 

 

 

 

Warning 

Electric voltage! 

Risk of death due to electrical voltage of 230 V during short-circuit in the low-voltage line. 
– 

Low-voltage and 230 V lines must not be installed together in a flush-mounted socket! 

 
 

Pos: 78 /#Neustruktur#/Online-Dokumentation (+KNX)/Sicherheitshinweise und Hinweise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Fachkenntnisse @ 23\mod_1336559183027_15.docx @ 209179 @ 2 @ 1 

 

7.1 

Requirements for the electrician 

 

 

 

Warning 

Electric voltage! 

Install the device only if you have the necessary electrical engineering knowledge and experience. 
• 

Incorrect installation endangers your life and that of the user of the electrical system. 

• 

Incorrect installation can cause serious damage to property, e.g. due to fire. 

 
The minimum necessary expert knowledge and requirements for the installation are as follows: 
• 

Apply the "five safety rules" (DIN VDE 0105, EN 50110):  

 

1.  Disconnect from power;  

 

2.  Secure against being re-connected;  

 

3.  Ensure there is no voltage; 

 

4.  Connect to earth and short-circuit; 

 

5.  Cover or barricade adjacent live parts. 

• 

Use suitable personal protective clothing. 

• 

Use only suitable tools and measuring devices. 

• 

Check the supply network type (TN system, IT system, TT system) to secure the following 
power supply conditions (classic connection to ground, protective earthing, necessary 
additional measures, etc.). 

 
 

Pos: 79 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @  @ 1 

 

 

 

Summary of Contents for 8215 U-500































Reviews: