ABB 500FSD10, Manual

Page: 21 / 34

Device description Compact device 500FSD20
Connectors Type
X1 "Power connector (X1)", page 23
X2 "Serial interface to DTE (X2)", page 24
X3 "Interface to transmission line (X3)",
page 25
X4 "Alarm relay (X4)", page 26
X5 "Serial interface for configuration (Con0)",
page 27
EXT "Extension interface (EXT)", page 27
4.3.3 Device data 500FSD20
The interface data can be found in Chapter 4.5, "Connections".
General Data
Type of modulation Frequency shift keying (FSK) with carrier
switch-off for multi-drop network
Type of communication Point-to-point or multi-drop network
Operation modes Full- or half-duplex via two-/ four-wire links
Channel assignment
•
according to CCITT raster (R.35, R.37,
R.38A, V.23/1200 baud)
•
additional options: 600 baud or 2400 baud
channel
Mechanical layout
Dimensions 99 x 45 x 115 mm (H x W x D)
Housing type Plastic housing
Mounting DIN rail mounting (EN 50022 TS35: 35 mm x 15
mm or 35 mm x 7.5 mm)
Cooling thermal convection (no moving parts)
Enclosure protection class IP20
Weight 230 g
Power supply input (X1)
Operating voltage 24...60 V DC -15%...+20%
Power consumption (typical) 3 W
Current demand (peak) 180 mA
Ordering information
500FSD20 R0001 1KGT039200R0001
4.4 General data
General standards
Safety tested according to
•
IEC 62368-1
Environmental conditions tested according to
•
ETSI EN 300 019-1-3 class 3.4
•
IEC 60255-21-1 class 1
1KGT151042 V000 1 21