Tropos Mobile Mesh Router Installation Guide Models 4310-XA and 4319-XA
16
3
Approved Antenna Configurations and
Attenuation Settings
This chapter lists approved antenna configurations and attenuation settings:
2.4 GHz Antenna
The information in this section applies to the Tropos 4310-XA mobile.
lists antenna configurations.
Note
CANADA ONLY:
This device has been designed to operate with the antennas listed in
, and
having a maximum gain of 12dBi. Antennas not included in this list or having a gain greater than 12dBi are
strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
Note
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the Effective Isotropic Radiated Power (EIRP) is not more than that permitted for successful
communication.
Table 10 802.11b/g Antenna Configurations (2400-2483 MHz)
Antenna
Ordering
Number
Measured
Cond. Avg.
Power (dBm)
Tx
Attenuation
Software
Setting (dB)
Approximate
EIRP (dBm)
7.4dBi omni, unit mounted (with cable)
7.4dBi omni, unit mounted (without
cable)
7.4dBi omni, unit mounted (MAG-
mount)
AN074090
AN074091
AN074095
28.6
0
36
