ABB 2CSM222501R1000, User Manual

Page: 12 / 59

En
gli
sh
- 10 -
User manual DWA
Activate Bluetooth on DWA devices (see page 46).
At the start the app displays the list of the associated DWA devices. To associate a new device, press the symbol “ ” in the upper
right corner.
All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list.
Note: each device is identified by the product code (for example DWA) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the DWA
Warning: make sure that the DWA is mains powered, Bluetooth interface is activated and that the display shows the main page (initial).
Otherwise the Bluetooth interface is not active and the device is not visible
Enter the password to associate the DWA with your device
After successfully completing the procedure, the DWA is added in the list of the associated devices.
Select the DWA on which you want to act from the list of the associated devices
Note: communication between the app and the DWA is point-to-point. This means that,
even in the presence of multiple DWA, the app can communicate with one only at a time.
The DWA currently connected to the app displays the symbol * immediately after the serial number
The app displays the initial page of the selected DWA. From this page you can:
a. Create new programs that will then be copied to the DWA
b. Change the settings of the DWA
c. View the parameters and associate an alias to the DWA
d. Manually control the relay output/s and activate the random switching function or cycle function.