Appendix A HMI menu structure
266 MODBUS® multivariable transmitter User manual 2105216 Rev. AB
| 79
Appendix A
HMI menu structure
When the transmitter is operating normally, the Operator Page 1 screen is displayed on the LCD (Figure 53). The default screen
displays the DP and SP values, the defined units of measure and a bar view of the operating temperature measured as a percent of
the temperature between the upper and lower range values. The Operator Page 1 is also user-definable by editing the properties in
the Display menu.
To access the Operator Menu, press the right soft key. Press the left soft key to access the Main Menu. Use the up and down arrow
keys and the right and left keys to navigate to the submenus and selections (Table 18).
Figure 53: HMI display
Summary of Contents for 266 MODBUS
Page 163: ......
