ABB Robotics IRB 1200, Product Specification

Page: 20 / 62

1.3.2 Operating requirements
Protection standard
Protection standard IEC529 Robot variant
IP40 All variants, manipulator
IP67 Option, all variants
Explosive environments
The robot must not be located or operated in an explosive environment.
Working range limitations
EPS will not be selectable. No mechanical limitation.
Ambient temperature
Temperature Protection class Description
+ 5°C
i
(41°F) to + 45°C (113°F) Standard Manipulator during opera-
tion
+ 5°C
i
(41°F) to + 35°C
ii
(113°F)
Option Manipulator with food
grade lubrication during
operation
See Product specification - Control-
ler IRC5
Standard/Option For the controller
- 25°C (-13°F) to + 55°C (131°F) Standard Complete robot during
transportation and storage
up to + 70°C (158°F) Standard For short periods (not ex-
ceeding 24 hours)
i
At low environmental temperature < 10ºC is, as with any other machine, a warm-up phase
recommended to be run with the robot. Otherwise there is a risk that the robot stops or run with
lower performance due to temperature dependent oil and grease viscosity.
ii
For robots with food grade lubrication, if environment temperature > 35ºC, contact ABB for further
information.
Relative humidity
Relative humidity Description
Max. 95% at constant temperature Complete robot during operation, transportation and
storage
20 Product specification - IRB 1200
3HAC046982-001 Revision: G
© Copyright 2017 ABB. All rights reserved.
1 Description
1.3.2 Operating requirements