24
|
Installation
Switched on
Connect the power cord to the back of the unit, then insert the plug into the outlet and turn
the switch to the on position.
Ignition position “
I
”
3
Place the external water tank on the back
of the
RO
M10H20
CAT
unit
•
The lower part of the water tank must be
well placed in the holes that are on both
sides of the unit, leaving the water tank well
fixed to prevent it from moving or falling.
•
The unit will automatically start generating
water when the tank is properly in place,
the control panel will show the following
illuminated symbol “
” Indicating that
the unit is in water purification mode in
progress.
4
