Setting Up The Phone
ABAKAFONE
Page 5
Note:
** Alarm 1 and 2 have 1 minute alarm time. While Alarm is sound-
ing, press any key to stop. For Alarm 3, alarm will only sound
once, after stopping, the unit will be automatically turned off.
** If the unit is in use, the ALARM will not sound.
4. RING TONES
Press SET to enter and press UP/DOWN continually until LCD di
s-
play “ SET 4 RING”, press SET again, LCD will display “RING XX”
and you can hear polyphonic ringer. Press UP/DOWN to select
your desired ringer (up to 12 selections) and After setting,
press
SET to enter the next setting or press EXIT to quit. When it is in
RING OFF, it will be in Do not disturbance mode. At this mode, all
incoming calls will be silent except for VIP but the LCD will light
up.
5. VOICE ANNOUNCEMENT
Press SET to enter and press UP/DOWN continually until LCD dis-
play “ SET 5 SPEECH”, press SET again, LCD will display
“SPEECH 02” which means voice announcement is 2 times. Press
UP/DOWN to select voice announcement time (up to 4 levels).
SPEECH OFF means voice announce is OFF. After setting,
press
SET to enter the next setting or press EXIT to quit.
6. IP ADDRESS SETTINGS
Press SET to enter and press UP/DOWN continually until LCD dis-
play “ SET 6 CONFIG”, press SET again, LCD will display
“CONFIG STATIC” and press UP/DOWN to select IP setting meth-
ods: “ CONFIG DHCP”,”CONFIG STATIC” and ” CONFIG
PPPoE”.
•
CONFIG DHCP
Press UP/DOWN to enter “CONFIG DHCP”, press SET to confirm. Press UP/
DOWN to select DHCP ON/OFF. After setting, press SET to enter the next setting
or press EXIT to quit. At this instant, LCD will display “Booting….” And the unit will
reset and get IP address.
S E T T I N G S
