420mm
722
D-Style 500mm Unit
Finished Floor Level
Important:
The
wall
brackets must be mounted so the
ir
outside edges are within
the internal dimensions of the unit. Do not exceed the dimensions below.
The
edges of the brackets should just touch the inside edges of the basin furniture.
520mm
128
D-Style 600mm Unit
Step2:
Fix Wall Brackets
Using the below measurements as a guide, position the
included
wall brackets
Note:
These instructions are based on installation to a blockwork wall. If you are
installing on to plasterboard / stud walling please use the appropriate fixings and
ensure that the wall is able to fully support the weight of the product.
A basin
fixing frame should ideally be used due to the weight involved.
Mark a hole centrally at each of the fixing points on
both
bracket
s and
then drill
8mm diameter holes using a suitable drill and bit.
Insert the supplied wall plug or suitable fixing into each hole then fix the wall brackets
in place using the screws supplied.
The edges of the brackets should just touch the
inside edges of the basin furniture. Do not overtighten.
