Occasional use in chlorinated pools is possible if the bracelet is rinsed with clean
water afterwards.
Do not use in seawater or saltwater pools. Do not use when showering or taking bath
in warm water. If the product is used incorrectly, you will lose the warranty.
Turning on, pairing and connecting with the applicaton
Android: EVOLVEO Fit
iOS: EVOLVEO Fit
Press and hold the spot “A” for about 2 seconds to turn the device on. Download and
install the "
EVOLVEO Fit
" application from Google Play. Register and log in to the
application. Turn on the Bluetooth feature on your device such as Smartphone or
Tablet. In the application, press the "Devices". Then press the “Add a new device”.
Select the "EVOLVEO Fitband B2". The application will search for Bluetooth devices
nearby. The found fitness bracelet appears in the application as "B2". Click on it, the
fitness bracelet will vibrate and be waiting for confirmation, which you perform by
pressing and holding the spot "A" for about 2 seconds. When successfully paired, the
application shows “paired” and the fitness bracelet is displayed as connected with a
Bluetooth symbol and battery next to it.
Turning off and restarting
To turn the device off, proceed as follows. Set the screen to default, i.e. time and date.
Press and hold the spot “A” for about 2 seconds, a small "1" symbol will appear on the
display under the battery indicator, hold the spot “A” for 2 seconds again, a small “2”
symbol will appear, repeat again and a small “3” symbol will appear. Repeat it for the
fourth time and an “off” symbol will appear. Finally press and hold the spot “A” for 2
seconds again to turn the device off. To restart the device, follow the same steps up to
the last one, then press the spot “A” briefly and an “arrow in a circle” restart symbol
will appear, after that press and hold the spot “A” for
2 seconds to restart the device. All measured data will be erased and the bracelet will
start measuring from zero. The third function following after restarting the device is
there to check the bracelet vibration; it can be repeatedly activated by holding the spot
"A" for 2 seconds.
Exception clause
1.
Heart rate and blood pressure measurement outputs are not intended as medical
or diagnostic background data.
