ab Solares Smart Spa Operating Manual Download Page 11 | Manualshive

Page: 11 / 40

background image

Solares™ Smart Spa Bathing System Operating Manual

CD0036

- 11 -

1121

Chemicals used for cleaning and disinfecting could be injurious to health if used incorrectly. Please
follow the

below guidelines when handling Apollo’s cleaning and disinfecting

chemicals:

Cid-A-L:

Hazard:
Toxic if swallowed. May cause severe skin burns and eye damage. May cause damage to organs.

Precautionary:
Use in a well-ventilated area. Do not breathe mist or vapor. Wash
thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the
environment. Wear protective gloves/clothing/eye protection/face protection.

Response: Collect spillage. If swallowed: Immediately call a poison center/doctor. If swallowed: Rinse
mouth with water and spit. Do NOT induce vomiting. If in eyes: flush eyes with plenty of water for at
least 15 minutes. If on skin: rinse with water. If on clothing: removed affected outerwear and wash.

Turbo-Clean:

Non-toxic.

If swallowed: Do NOT induce vomiting. Drink lots of water and call a physician if necessary. If in eyes:
Flush eyes with plenty of water for 15 minutes. If on skin: Sensitive-skinned persons should wash off
with soap and water.

Disposal of waste products and equipment at end of life

Chemicals
Dilute Cid-A-L and Turbo Clean 1:128 and rinse down the drain.

Electronic Equipment (HMI, Actuator, Slide Valves, Servo Motor, Solenoid Valves, Dock Latch, Electrical
Boxes)
Do not throw away. Contact local electrical recycling services

UV Lamps
Do not throw away. Contact local disposal services and inquire about the disposal of mercury lamps.

«
...
9
10
11
12
13
...
»

Summary of Contents for Solares Smart Spa









































Reviews:

No comments

Related manuals for Solares Smart Spa

Brand: mspa Pages: 64

LUXEAIR 28 ai28lux7236

Brand: Aquatic Pages: 1

Brand: Steam Planet Pages: 11

Experience SIENNA

Brand: Jacuzzi Pages: 40

Brand: Balboa Pages: 2

Brand: Jetta Pages: 15

Brand: Trade-wind Pages: 10

Brand: Jacuzzi Pages: 2

Brand: Wave Pages: 11

Brand: Richy Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands