8
POINT I/O 2 or 4 Relay Output Module
Publication 1734-IN055D-EN-P - April 2004
3.
Press on the module lock on the top of the module.
4.
Pull on the I/O module to remove from the base.
5.
Repeat steps 1, 2, 3 and 4 for the module to the right.
6.
Use a small bladed screwdriver to rotate the orange base locking
screw to a vertical position. This releases the locking mechanism.
7.
Then lift straight up to remove.
WARNING
When you connect or disconnect the Removable
Terminal Block (RTB) with field side power applied, an
electrical arc can occur. This could cause an explosion
in hazardous location installations. Be sure that power
is removed or the area is nonhazardous before
proceeding.
WARNING
When you insert or remove the module while
backplane power is on, an electrical arc can occur. This
could cause an explosion in hazardous location
installations. Be sure that power is removed or the area
is nonhazardous before proceeding.
