manualshive.com logo in svg

AB IPBox 55HD, User Manual, Page: 51 / 68

Share
Download
AB IPBox 55HD User Manual Download Page 51

51 

 

Software restore - Image upgrade wizard 

 

 

 

 

 

Image upgrade wizard – page 2: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Follow the instructions on 

the screen. 

 

Select „OK, guide me 

through...“ and press OK to 

activate the wizard or select 

„Exit the wizard“ and press 

OK to exit. 

Select memory media for 

storage backup files – the 

corresponding folder path 

is displayed on the LCD 

display of your receiver:  

Harddisk 

/media/hdd/ 

Network Mount 

/media/net/ 

Temporary Folder 

/tmp/ 

(Example on the picture 

also USB) 

USB Mass Storage 

/autofs/sdb3/ 

 

Press OK to run backup 

saving. After successful 

action an information 

window appears. Press OK 

to continue the upgrade. 

Note: 

It is good to use USB memory (flash) when you want to set up the same way several receivers. 

In such a case setting up can be conducted simply by „Backup restore“ function. 

Take care of consumption of used USB flash memory for backup 

– both USB ports are 

protected against overloading! Use USB HUB with external power supply for USB flash memory 

devices with higher consumption. Flash format - FAT32 or format USB disk in the Ipbox -  Linux. 

Ext3.  

Summary of Contents for 55HD





































































Reviews:

No comments