manualshive.com logo in svg

AB-COM AB IPBox 55HD, User Manual, Page: 64 / 68

Share
Download
AB-COM AB IPBox 55HD User Manual Download Page 64

64 

 

 

 

Copyright

 

 

The information, images and data contained on this document are copyrighted by AB-COM 
s.r.o. and may not be distributed, modified, reproduced in whole or in part without prior 
permission of representative AB-COM s.r.o. company. 
The Slovak, Czech and English translation of the document is also copyrighted byAB-COM 
s.r.o. 
 

 

 

The manual describes actual specifications and features of the appliance.  

Software and hardware used in the appliance is under permanent development. 

Specifications and features are subject to change without notice.  

Therefore the manufacturer or the seller is not responsible for potential inaccuracies or 

mistakes in this manual.  

 

 

 

Warning: 
AB COM s.r.o is not responsible for any damages or harms caused by installation and 
operation of illegal software or software not recommended by manufacturer. 
Watching a Pay TV without paying corresponding abonent fees is illegal a will be 
punished according the laws. 

 

Summary of Contents for AB IPBox 55HD





































































Reviews:

No comments