High Speed USB2.0 PCI Express Card
2
JP1: USB Bus Power Selector
Settings
Jumper at “P”: The USB2.0 Bus
Power is supplied by PCI Express slot
of the motherboard (DC+5V
supplied from PCB)
(default)
Jumper at “A”: The USB2.0 Bus
Power is supplied by the AUX
power connector (J6). You may
need a power cable to connect
the DC+5V power from the system
power connector to J6 to get the
AUX power supplied. This option
provide more power for the USB
devices over the USB2.0 cable
1.
Turn the system power OFF before installation!
2.
Use static electricity discharge precautions.
Remove possible static discharge potential from any
objects that the combo card may come in contact with
before installation. This can be accomplished by touching
a bare metal chassis rail after you have turned off the
power.
3.
Remove the chassis cover from your computer
4.
Locate an unused PCI Express slot (typically white or black,
and smaller than the PCI slot) and remove the
corresponding slot cover from computer chassis.
4. Installing USB2.0 PCI Express Card
3. Jumper Settings
P
A
P
A
