4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case
2
1.
Plug the USB connector (Type-A) of the cable into the USB
host port of your PC or an available USB port on a USB hub.
2.
Plug the serial device to the DB9 male connector at the
other end of this adapter cable.
3.
Proceed with the next section “Installing Drivers” to install
the virtual COM port drivers for your Operating System.
The RS232 Serial Adapter Cable can be hot-plugged to the USB
port of your computer due to the specifications of USB. It
supports the following operating systems. The drivers are
shipped in the following folder on the supplied driver CD.
1.
Driver Locations on the CD
These instructions are for installing the drivers from the CD
supplied with the product. If you are installing drivers for Win98,
ME, 2000 or XP, when prompted for the location of the drivers,
specify your CD-ROM drive and the locations according to the
following table:
2. Plugging the Adapter Cable
3. Installing Drivers
Linux
Mac OS 9.x, 8.x
Mac OS X
Windows 2000, XP,
Server 2003
Windows 98, 98SE, ME
Windows CE for ARM
Windows CE for ix86
Windows XP, 64bit
