Technical Details
Chapter 4
IMAGE IS BLURRED
Possible Causes
Solution
The Projector is not in focus
Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an evern plane with the screen.
NO SYNC, NO SIGNAL
Troubleshooting
1. Be sure to setup the computer to enable a video signal output. On some laptops
this is done by pressing and holding Function F5 key. If using the P450 Pro as
an external monitor on Windows based systems, this can be done by select-
ing “extend my desktop to this monitor”. The native resolution of the P450 Pro
projector is 1280x800. Depending on the video driver different resolutions may
need to be selected for proper output.
55
