Getting Started
1. To power-on a fully charged HD Pico, hold down the power button for approximately
three seconds until the projector turns on.
4
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press the power button once, then again to confirm.
2. After a few seconds, the unit should turn off fully.
1. If you want to charge your HD Pico, you can simply plug in the Micro USB cable to
any computer or USB adapter and connect the other end of Micro USB cable to the
HD Pico (5v DC port).
Charging the projector
NOTE: The HD Pico Projector battery does not charge when it is in operation.
Summary of Contents for HD RICO
Page 1: ...aaxa TECHNOLOGIES User Guide...
Page 10: ...6 External Inputs and Outputs...
Page 44: ...40 Notes...