background image

21 

 

for a period of two (1) year from the date of original purchase.  Log splitters used for commercial or for rental have 
a warranty period of 60 days from date of original purchase. 

under normal use during the One (1) year warranty period.  Warranty repairs or replacements will be made without 
charge for parts or labor. Parts replaced during warranty repairs will be considered as part of the original product 
and will have the same warranty period as the original product. 

TO EXERCISE WARRANTY COVERAGE: 

Do not return to retailer!  

For warranty and technical support call the toll-free Customer Service Number: 

 WARRANTY COVERAGE: 

This warranty is conveyed to the original purchaser and is not transferable.  

Log splitters contain parts that will wear out with usage and parts that need maintenance. The warranty does not 
cover wear or maintenance parts. Specifically, the warranty does not cover hydraulic fluid. 

Warranty does not extend to log splitters damaged or affected by accidents, neglect, misuse, contaminated fuel, 
unauthorized alterations, use in applications beyond product design and any other modification or abuse. 

implied warranties are limited to One (1) year as stated in this written limited warranty. Some states do not allow 
limitation on the length of an implied warranty. Some states do not allow the exclusion or limitation of incidental or 
consequential damages. This warranty gives you the specific legal right, and you may have other rights that vary by 
state.

 

For questions / comments, technical assistance or repair parts 

  

Please Call Toll Free at:  1-866-591-8921

SAVE YOUR RECEIPTS.  THIS WARRANTY IS VOID WITHOUT THEM. 

 

 
 

ONE YEAR LIMITED WARRANTY 

AVVIX 

 

log splitters are warranted (to the original purchaser) to be free from defects in materials and workmanship 

AVVIX will repair or replace, at its discretion, any part that is proven to be defective in materials or workmanship 

1-866-591-8921 and you will be informed of the nearest authorized service center. We will prearrange the repair

with the center.  

AVVIX is not liable for any indirect, incidental or consequential damages from the sale or use of this product. Any 

A A V I X   L O G   S P L I T T E R S

Summary of Contents for AGT306






















Reviews: