Fig. 24
PAGE 23
Recoil Starter
The recoil starter handle (18) is positioned at the rear of the engine.
1. Slowly pull on the recoil starter handle (18) and fit it into the rope
guide (23) on the right hand side of the upper handle (4) during
operation (Fig. 22).
2. Pull on the recoil starter handle (18) to start the engine (Fig. 23). Do
not remove the recoil starter from the rope guide.
WARNING!
Never twist the starter rope around your hand! Only
pull on the handle!
WARNING!
Do not suddenly release the recoil starter handle!
Allow the rope to return slowly and in a controlled manner each
time it is pulled!
Brake
1. Pull the brake bar (2) towards the handle (1) and hold it in position
when starting the engine. Keep it in this position during operation (Fig. 24).
2. Release the brake bar (2) to stop the engine.
Fig.22
