8
4. When charge is over, the red light on the battery
charger from red to green.
OPERATION
CHECKS PRIOR TO OPERATION
WARNING!
Ensure the hedge trimmer is
disconnected from the power supply before
performing any of the following operations.
If any parts are missing, damaged or broken, do not
operate your Hedge trimmer until all damaged parts
have been replaced or repaired. Failure to do so could
result in serious personal injury. DO NOT USE
WITHOUT HANDLE AND GUARD.
1. Check that the blades are not damaged. if so the
blades will need to be replaced.
WARNING!
Make sure that the work area is free of
rocks, debris, lines and other foreign objects.
CONTROLS
For user safety the safety switch and on/off switch
must be operated simultaneously.
1. Using one hand depress and hold the safety switch
on the front handle.
2. To turn on squeeze the on/off switch.
3. Once either the safety switch or on/off switch is
released the hedge trimmer will stop.
WARNING!
Always use the hedge trimmer with both
hands.
Rotating the rear handle
This hedge trimmer is fitted with a rotating rear handle.
It can be rotated counter clockwise 45° and 90° and
clockwise 45° and 90°
1. To rotate the rear handle push the rotating handle
lock and rotate the rear handle left or right to the
desired position.
Note:
The handle has 5 positions, 45° and 90º to the
left, 0° in the centre and 45° and 90º to the right. The
rotating handle button will lock at any of these
positions
2. To rotate the rear handle up or down to the desired
position push the up/down rotary switch.
USING THE HEDGE TRIMMER
1. Maintain proper footing and balance. Do not
overreach.
2. Checking the battery charge level. The battery pack
charge level in indicated by the charge state LED.
Press the button for state of charge display on the
battery pack. The LEDs indicates the battery’s charge
level.
3. Squeeze both the safety switch and the on/off
switch to start the trimmer.
