Page 1: ......
Page 2: ...ltiCasting with Layer 2 Managed Switch Make Sure Same Video Channel setting on all PB7000 senders and PB7000 receivers Managed Switch with 802 1Q VLAN Only One Sender is allowed in Each VLAN Group Multiple Receivers Ok in Each VLAN Group Following Standard Installation procedure to connect all senders and receivers to managed switch Dip Switch All Same Refer Instruction below All Same Broadcasting...
Page 3: ...hannel Once one of Receivers starting RS 232 communication other Receivers won t be able to send data at same time When that Receiver finishes RS 232 communication Sender will keep waiting for a period of time without any data input then reopen RS 232 talking to other Receivers RS 232 Guest Mode PB7000 provides RS 232 guest mode which allow installer user can do RS 232 command pass thru over IP di...
Page 4: ...rver s Mic In Line In to for Audio from Receiver to PC 4 Following same Broadcasting Multicasting Installation Procedure for whole system setup To Switch Video Channel Switch to other Video Source USB KVM Installation If only one Receiver connected to the Target Sender 1 to 1 USB Link will establish automatically If multiple Receiver connected to same sender Just push the USB button on Receiver ab...
