DRAFT
3
2.
Press the power button
3.
Follow the instructions in the operating system to complete the setup
Troubleshooting
In case devices freezes and you need to do a hard reset, press and hold the power button for approx. 14 seconds. Device
will be turned off now.
Connecting USB3.0 devices while being connected to a WLAN network requires it to be a 5GHz connection to maintain it.
2.4GHz networks will be disconnected on the Inari 6 side while USB3.0 devices are in use.
Important Product and Safety information
•
Do not drop, bend or twist your tablet. This can break tablet display glass, internal circuit boards or mechanics. If
the glass breaks, do not touch the glass parts of the device or attempt to remove the broken glass from the device.
Stop using the device until the glass is replaced by qualified service personnel.
•
Do not try to disassembly your tablet. This may damage the device.
•
Operate your device in a place where temperature is between -10°C and +50°C.
•
Charge your device with the supplied charger in a place where temperature is b10°C and +45°C.
•
Store your device in a place where temperature is between -20°C and +60°C.
•
This product is equipped with USB-C connector, intended to be supplied by certified power supply capable of
providing 5V-12V according to USB specification
•
For charging the socket-outlet shall be installed near the equipment and shall be easily accessible.
•
Protect your device from water and moisture intake. Keep connector doors closed when not in use to prevent
water and moisture intake.
•
Use only soft, clean and dry lint-free cloth to clean your device.
•
Keep the unit and accessories away from small children.
•
Switch off your device before boarding to an aircraft.
•
Switch off your device in any area with a potentially explosive atmosphere.
•
Your device meets guidelines for exposure to radio waves (SAR, Specific Absorption Rate) when kept in a close
distance to your body.
•
Use only charger delivered with your tablet.
