3.10
Loading of a vehicle or a shelf
Drive as closely as possible to the sill of the car’s boot or the shelf. Press the
Up/Down switch in direction “UP” until the blade is approximately 10 mm
above the sill of the car’s boot or the shelf
. Slide the load of the car's boot
or the shelf
.
3.11
Unloading of a vehicle or a shelf
Drive as closely as possible to the sill of the car’s boot or the shelf. Push the
Up/Down switch in direction “UP” until the surface of the blade is approxi-
mately 10 mm underneath the sill of the car’s boot or the shelf
. Pull the
load on the blade of the vertical lift
.
F
Please make sure that the load touches the back bars!
F
Please always drive with the loads in the lowest position!
3.12
Functional check
F
Please check the device’s electronic functions before each operati-
on!
F
Make sure that the batteries are fully charged before each operation!
16
Vertical lift V1001
Summary of Contents for V1001
