The climbing process takes place in two intervals.
7.
Press the UP/DOWN switch, direction UP to begin the climbing pro-
cess by moving the climber downward.
F
Always keep the device under tension during the entire climbing pro-
cess, i.e. always pull it slightly backward toward you.
After the climber reaches the floor
, it assumes the load of the main wheels
while the main wheels and the frame are lifted at the same time
.
The first interval is finished when the main wheels
touch down on the
next higher step and resume the load of the climber
.
27
s
-max
sella
· 160 kg
4
5
7
6
